BAS200

BAS200 lightweight concrete CLC block machine overview

Foamed concrete machine BAS200 is designed to prepare a uniform foam concrete mass by mechanically whipping a cement-sand mixture and foam followed by pneumatic discharge along a concrete pipe to the place of use. BAS200 is universal and allows to receive foam concrete, polystyrene concrete and other lightweight concretes on the basis of a concrete mix. Mixer promote active mixing of concrete mass, intensive air entrainment and even distribution of all its components to obtain a homogeneous mixture, allows to create excess internal pressure with the help of a air compressor and feeding the mixture to place of installation by means of compressed air.

Application

This lightweight concrete machine belongs to mobile stations for manufacturing and supplying foam concrete, foam-polystyrene concrete and foam concrete mixes, for use directly on construction sites. Can work both permanently and mobile. To date, BAS200 is an indispensable thing in the construction of cottages, holiday homes, garages. It can also be used for the production of CLC blocks and foam concrete with a density of 200 to 900 kg/m³ Density and properties of foamed concrete depend on the selected formulation. BAS200 designed for pouring walls, floors, roofs. Filling of prepared building voids.

Features

The peculiarity of the equipment for the production of foam concrete BAS200 is that it is produced not only for power supply from the 380-volt network but also from the 220-volt network. This makes it possible to work in any remote locations that are not equipped with industrial power networks. This foam concrete maximum width is 800 mm. Such a small size and the presence of the wheel set allow free movement in already constructed buildings (for the production of screeds and other works). Light weight and dimensions allow it to be transported in a trailer of a car, which minimizes transportation costs.

Economic advantage

Light weight and dimensions allow it to be transported in a trailer of a car like pick-up, which minimizes transportation costs. This lightweight concrete and clc blocks machine is made in such a way that there is practically nothing to break. The only consumable in it is the graphite grease, which is sold in any technical store. Low cost of this equipment allows to reduce commercial risk of its operation to a minimum.

Foam concrete blocks manufacturing using BAS200

BAS200 is used for the production of foam blocks of various sizes and densities. This lightweight concrete machine allows to manufacturing:

• wall blocks (for masonry walls)
• partition blocks (used in the construction of partitions inside buildings)
• universal blocks (universal blocks with custom dimensions)

The density of blocks depends on their application and can be from 200 to 900 kg/m³

Monolithic foam concrete production using BAS200

Due to its mobility, BAS200 is used for the production of monolithic foamed concrete of various densities. This foamed concrete machine allows you to produce:

• construction of walls (external and internal walls of buildings)
• screed construction
• construction of thermal and sound insulation (floors and ceilings)
• filling voids with monolithic foam concrete

The density of monolithic foam concrete depends on the purpose and can be from 200 to 900 kg/m³

Polystyrene concrete production using BAS200

BAS200 is a perfect machine for the polystyrene concrete products manufacturing. This ecological material is increasingly being used in modern construction. Due to its technical characteristics, BAS200 perfectly copes with the task of producing any products from polystyrene concrete. Also, this foamed concrete machine is suitable for the production of monolithic polystyrene concrete. We provide technical support and formulation for the polystyrene concrete various densities manufacturing using this machine. Like foamed concrete, polystyrene concrete is an excellent thermal and sound insulator. One of its advantages of polystyrene concrete is the absence of restrictions on the daily height of pouring in monolithic construction.