BAS130 foam concrete machine overview
Foam concrete machine (CLC mixer) BAS130 designed to prepare a uniform foam concrete mass by mechanically whipping the cement-sand mixture and foam (depending on the formulation) followed by pneumatic unloading along the concrete pipe to the place of use.
This foam concrete machine is a mobile station designed for manufacturing and supplying lifghtweight concrete mortars, such as foamed concrete or polystyrene concrete. This machine can be used directly on construction place. It can be operated both permanently and mobile mode. To date, this foamed concrete machine is an indispensable tool in the construction and renovation of cottages, holiday homes, garages. It can also be used for the CLC blocks production and foam concrete manufacturing. The lightweight concrete density produced using this clc machine ranges from of 200 kg/m3 to 900 kg/m3.
This machine is especially convenient for the production of thermal insulation and sound insulation. Due to its low weight and dimensions, the BAS130 can be easily moved around the construction site. And thus, this foam concrete machine can be easily moved to the level of pouring the mixture. This avoids the use of expensive concrete pumps. That certainly saves the budget and increases the reliability of the construction process. Also one of the advantages of the mobility of this machine is that it can be easily delivered to any place without powerful and expensive transport. This makes it possible to use it in the most inaccessible places.
Raw materials used for the production of lightweight concrete
Various materials can be used for the production of lightweight concrete. The composition of the materials and their proportions depend on the type of final solution. Usually for the production of foam concrete or polystyrene concrete are used:
- foaming agent
- polystyrene as an additive for polystyrene concrete
The fraction of materials should not exceed 5 mm.
Principle of operation
This foam concrete machine is universal and allows to receive foam concrete, polystyrene concrete and other materials on the concrete mixes basis. Mixer promote efficient mixing of concrete mass, intensive air entrainment and even distribution of all components to obtain a homogeneous mixture. Lightweight concrete machine BAS130 creates excessive internal pressure with the help of an air compressor with a capacity of 200 liters / min with a receiver of 30 liters and feeding the mixture to the equipment site by means of compressed air. The air compressor is purchased separately and is designed for unloading the finished lightweight concrete mortar.
The peculiarity of this foam concrete machine is that it is produced not only for power supply from the 380v network but also from the 220v.
One of this mixer features is that it is produced not only for power supply from an industrial main. At your request, we can produce this foam concrete machine for any voltage and frequency main that exist in your country.
It makes it possible to work in any remote locations that are not equipped with industrial power supply networks. The maximum width of this clc machine is 950mm. Such a small size and the presence of the wheel set allow free movement in already constructed buildings (for the production of screeds and other works).
Light weight and dimensions allow it to be transported in a trailer of a car like pick-up, which minimizes transportation costs. This foam concrete machine is made in such a way that there is practically nothing to break. The only consumable in it is the graphite grease, which is sold in any technical store. Low cost of this equipment allows to reduce commercial risk of its operation to a minimum.